CREO PROJECTS TRAINING

This is for the people who want to be in the top 10% of all the people who learn similar software. This will improve the job chances from 10% to 90% when you attend a job on this software.

Advanced
99 Students Enrolled
Created By Engineers Cadd Centre (P) Ltd
Last Updated Fri, 09-Dec-2022 English
About Course
Creo Elements or CATIA or UG or Solidworks is learnt by almost all Mechanical engineers. Out of 10 Jobs available in the Solid Modeling/ Product design areas, one receives over 500 applications. Of these 500 Engineers, about 60% will not be good in basics of 'Engineering drawing and Machine drawing' subjects. So, they get disqualified straight away as they don't have 3D visualization skills and cannot draw even the missing views or sections views. Of, the remaining 40% engineers,  20% people will be relatively weak in Creo elements software and will fail in the practical test. So, finally there are 10% people who are good both on the subject and also the software. Now, in the final 50 short listed engineers, there are only 10 jobs.This is where, doing this projects course will come to your rescue. When compared to a person who has done just the course, training along with so many modeling projects will give that cutting edge skills required to crack the interview. Its simple. What we say is "learning more than others" is the only way to get a Job.
What Will I Learn?

Course Syllabus
261 Lessons 03:58:01 Hours
STUFFING BOX ASSEMBLY
7 Lessons 00:50:44 Hours
  • 1. SBA Body 00:09:13
  • 2. SBA Gland 00:08:42
  • 3. SBA Bush 00:05:22
  • 4. SBA Stud 00:11:53
  • 5. SBA Nut 00:06:56
  • 6. SBA Shaft 00:02:08
  • 7. Stuffing Box Assembly 00:06:30
  • 1. SECA Block 00:15:29
  • 2. SECA Piston Rod 00:06:41
  • 3. SECA Gudgeon Pin 00:04:47
  • 4. SECA Side Block 00:07:13
  • 5. SECA Cotter 00:03:03
  • 6. Steam Engine Crosshead Assembly 00:07:48
  • 1. ACA Body 00:14:57
  • 2. ACA Plug 00:07:24
  • 3. ACA Screw Cap 00:05:05
  • 4. ACA Spring 00:02:25
  • 5. ACA Lever 00:03:57
  • 6. Air Cock Assembly 00:11:20
  • 1. BEA Straps Part 1 00:06:08
  • 2. BEA Straps Part 2 00:07:06
  • 3. BEA Sheave Part 1 00:07:29
  • 4. BEA Sheave Part 2 00:03:28
  • 5. BEA Packing Strip 00:02:44
  • 6. BEA Nuts 00:04:33
  • 7. BEA Strap Bolt 00:05:32
  • 8. BEA Split Pin 00:00:49
  • 9. BEA Nuts 00:05:02
  • 10. BEA Stud With Nut 00:06:16
  • 11. BEA Accentric Rod 00:07:13
  • 12. Bearing Eccentric Assembly Part 1 00:09:21
  • 13. Bearing Eccentric Assembly Part 2 00:07:58
  • 1. BOCA Body 1A 00:20:59
  • 2. BOCA Body 1B 00:02:03
  • 3. BOCA Cock 00:15:34
  • 4. BOCA Gland 00:08:28
  • 5. BOCA Stud 00:06:05
  • 6. Blow Off Cock Assembly 00:07:50
  • 1. BTFCA Flange 1 00:09:13
  • 2. BTFCA Flange 2 00:05:32
  • 3. BTFCA Shaft 00:02:30
  • 4. BTFCA Pin 00:02:59
  • 5. BTFCA Nut 00:03:09
  • 6. BTFCA Feather Key 00:02:39
  • 7. BTFCA Bush 00:01:56
  • 8. Bush Type Flange Coupling Assembly 00:11:29
  • 1. CCA Frame 00:17:18
  • 2. CCA Screw 00:06:40
  • 3. CCA Pad 00:06:12
  • 4. CCA Tommy Bar 00:05:39
  • 5. CCA Collar 00:02:52
  • 6. CCA Pin 00:02:10
  • 7. CCA Cap Screw 00:02:41
  • 8. C Clamp Assembly 00:11:35
  • 1. CBA Swivel Plate 00:14:10
  • 2. CBA Drag Release Plate 00:05:09
  • 3. CBA Pin 00:00:45
  • 4. CBA Tool Holder 00:06:29
  • 5. CBA Tool Clamping Screw 00:03:58
  • 6. CBA Washer 00:01:30
  • 7. Clapper Block Assembly 00:07:14
  • 1. CJWSEA Socket End 00:10:11
  • 2. CJWSEA Spigot End 00:06:23
  • 3. CJWSEA Cotter Joint 00:02:52
  • 4. Cotter Joint With Spigot End And Socket End Assembly 00:05:36
  • 1. CHA Crane Hook 00:14:26
  • 2. CHA Support Plate 00:05:46
  • 3. CHA Hook Anchor 00:09:30
  • 4. CHA End Bush 00:05:02
  • 5. CHA Plate Spacer 00:03:09
  • 6. CHA Bush 00:02:37
  • 7. CHA Lock Nut Part 1 00:02:33
  • 7. CHA Lock Nut1 00:02:33
  • 8. CHA Lock Nut Part 2 00:02:00
  • 8. CHA Lock Nut2 00:02:00
  • 9. CHA Lock Nut Part 3 00:04:27
  • 9. CHA Lock Nut3 00:04:27
  • 10. CHA Washer 00:00:46
  • 11. Crane Hook Assmebly 00:13:45
  • 1. CHA Body 00:11:58
  • 2. CHA Rod End 00:05:54
  • 3. CHA Cover Plate 00:02:48
  • 4. CHA Brrasses 00:04:27
  • 5. CHA Bolt 00:07:01
  • 6. CHA Nut 00:06:44
  • 7. CHA Lock Nut 00:05:40
  • 8. Cross Head Assembly 00:13:18
  • 1. DJA Base Plate 00:04:35
  • 2. DJA Stem 00:05:42
  • 3. DJA Jig Plate 00:04:59
  • 4. DJA Screw 00:04:36
  • 5. DJA Stud 00:05:42
  • 6. DJA Nut M20 00:01:58
  • 7. DJA Buse Case Hardened 00:01:16
  • 8. DJA Latch Washer 00:06:26
  • 9. DJA Screw 00:03:59
  • 10. Drill Jig Assembly 00:10:47
  • 1. FCVA Body 00:24:48
  • 2. FCVA Cover 00:09:57
  • 3. FCVA Spindle 00:07:57
  • 4. FCVA Valve 00:06:23
  • 5. FCVA Valve Seat 00:03:33
  • 6. FCVA Gland 00:05:17
  • 7. FCVA Hand Wheel 00:04:43
  • 8. FCVA Stud 00:02:51
  • 9. FCVA Stud 00:02:55
  • 10. FCVA Nut 00:02:00
  • 11. FCVA Nut 00:01:46
  • 12. Feed Check Valve Assembly 00:13:23
  • 1. FBA Base 00:18:16
  • 2. FBA Bush 00:00:07
  • 3. FBA Disc 00:00:03
  • 4. FBA Shaft 00:02:06
  • 5. FBA Pin 00:00:44
  • 6. Footstep Bearing Assembly 00:08:11
  • 1. FIA Body 00:21:32
  • 2. FIA Nozzle 00:09:06
  • 3. FIA Nozzle Holder 00:07:08
  • 4. FIA Cap 00:03:56
  • 5. FIA Nozzle Pin 00:02:56
  • 6. FIA Dist Pin 00:03:23
  • 7. FIA Spring 00:01:50
  • 8. FIA Screw Adjuster 00:02:11
  • 9. FIA Adjusting Screw 00:02:13
  • 10. FIA Lock Nut 00:02:54
  • 11. Assembly Fuel Injector 00:11:48
  • 1. GVA Valve Body Part 1 00:08:40
  • 2. GVA Valve Body Part 2 00:03:00
  • 3. GVA Union 00:12:28
  • 4. GVA Union Ring 00:04:22
  • 5. GVA Wedge Valve 00:03:55
  • 6. GVA Stem Nut 00:02:13
  • 7. GVA Stem 00:07:28
  • 8. GVA Hand Wheel 00:09:25
  • 9. GVA Gland 00:02:38
  • 10. GVA Inside Union 00:01:01
  • 11. Gate Valve Assembly 00:12:00
  • 1. KJA Fork End 00:10:57
  • 2. KJA Eye End 00:04:16
  • 3. KJA Pin 00:03:06
  • 4. KJA Collar 00:01:41
  • 5. KJA Taper Pin 00:01:19
  • 6. Knuckle Joint Assembly 00:06:21
  • 1. LTSA Body Part A 00:07:52
  • 2. LTSA Body Part B 00:08:36
  • 3. LTSA Body Part C 00:09:50
  • 4. LTSA Body Part D 00:08:58
  • 5. LTSA Barrel 00:10:15
  • 6. LTSA Spindle With Washer And Nut 00:10:17
  • 7. LTSA Washer And Nut 00:05:38
  • 8. LTSA Centre 00:02:31
  • 9. LTSA Hand Wheel 00:08:26
  • 10. LTSA Clamping Lever 00:09:01
  • 11. LTSA Spindle Bearing 00:05:07
  • 12. LTSA Stud 00:05:02
  • 13. LTSA Stud 00:03:41
  • 14. LTSA Screw 00:05:04
  • 15. Lathe Tail Stock Assembly 00:14:05
  • 1. MVA Base 00:18:41
  • 2. MVA Movable Jaw 00:08:26
  • 3. MVA Sliding Block 00:09:19
  • 4. MVA Guide Screw 00:06:44
  • 5. MVA Serrated Plate 00:04:32
  • 6. MVA C S K Screw 34 Long 00:04:07
  • 7. MVA C S K Screw 30 Long 00:02:37
  • 8. MVA C S K Screw 50 Long 00:02:21
  • 9. MVA Washer 00:01:31
  • 10. MVA Nut 00:03:01
  • 11. Machine Vice Assembly 00:16:00
  • 1 MMTSA Body 00:21:03
  • 2. MMTSA Center 00:02:59
  • 3. MMTSA Hand Wheel 00:05:02
  • 4. MMTSA Screw 1 00:03:21
  • 5. MMTSA Screw 2 00:03:22
  • 6. MMTSA Washer 00:00:39
  • 7. MMTSA Nut 00:01:43
  • 8. MMTSA Key 00:01:35
  • 9. Milling Machine tail Stock Assembly 00:11:14
  • 1. OHCA Flange 00:08:19
  • 2. OHCA Disc 00:03:48
  • 3. OHCA Shaft 00:01:23
  • 4. OHCA Key 00:01:27
  • 5. Oldham Coupling Assembly 00:09:18
  • 1. PEPA Piston 00:18:14
  • 2. PEPA Piston Pin 00:01:38
  • 3. PEPA Piston Pin Plug 00:01:41
  • 4. PEPA Piston Ring 00:03:15
  • 5. Petrol Engin Piston Assembly 00:15:14
  • 1. PBA Base 00:26:53
  • 2. PBA Bearing Brass 00:07:00
  • 3. PBA Cap 00:08:25
  • 4. PBA Bolt And Nut 00:10:10
  • 5. Plumber Block Assembly 00:06:02
  • 1. PFCA Shaft 00:01:42
  • 2. PFCA Flange 1 00:07:42
  • 3. PFCA Flange 2 00:05:58
  • 4. PFCA Bolt 00:04:03
  • 5. PFCA Nut 00:03:10
  • 6. PFCA Key 00:01:41
  • 7. Pro Flange Coupling Assembly 00:09:40
  • 1. RESA Master Rod Part 1 00:04:20
  • 2. RESA Master Rod Part 2 00:15:07
  • 3. RESA Master Rod Part 3 00:02:18
  • 4. RESA Articulated Rod 00:13:04
  • 5. RESA Piston 00:17:13
  • 6. RESA Master Rod Bearing 00:01:20
  • 9. RESA Link Pin 00:02:25
  • 7. RESA Rod Bush Upper 00:01:13
  • 8. RESA Rod Bush Lower 00:01:22
  • 10. RESA Piston Pin 00:01:06
  • 11. RESA Piston Pin Plug 00:01:38
  • 12. RESA Piston Ring 00:05:34
  • 13. Radial Engine Sub Assembly Part 1 00:11:21
  • 14. Radial Engine Sub Assembly Part 2 00:09:50
  • 1. RCA Barrel 00:26:57
  • 2. RCA Cover 1 00:09:51
  • 3. RCA Center 00:03:45
  • 4. RCA Sleeve 00:00:54
  • 5. RCA Cover 2 00:04:37
  • 6. Revolving Center Assembly 00:05:43
  • 1. SDSVA Valve Body Part 1 00:09:32
  • 2. SDSVA Valve Body Part 2 00:11:55
  • 3. SDSVA Bonnet 00:09:09
  • 4. SDSVA Gland Tightening Nut 00:02:57
  • 5. SDSVA Gland 00:02:44
  • 6. SDSVA Sleeve 00:01:52
  • 7. SDSVA Coller 00:07:53
  • 8. SDSVA Stem With Screw 00:07:24
  • 9. SDSVA Actuating Screw End 00:03:18
  • 10. SDSVA Screwed Sleeve 00:00:53
  • 11. SDSVA Valve Seat 00:00:39
  • 12. SDSVA Screw 00:03:20
  • 13. SDSVA Hand Wheel 00:04:18
  • 14. SDSVA Nut 00:01:47
  • 15. Screw Down Stop Valve Assembly Part 1 00:08:33
  • 16. Screw Down Stop Valve Assembly Part 2 00:06:11
  • 1. SPA Shell 00:14:17
  • 3. SPA Central Electrode 00:03:51
  • 4. SPA Nut 00:07:32
  • 5. SPA Terminal 00:04:49
  • 6. Spark Plug Assembly 00:07:01
  • 2. SPA Insulator 00:17:22
  • 1. STPA Tool Holder 00:08:53
  • 2. STPA Base Palte 00:07:06
  • 3. STPA Clamp 00:04:43
  • 4. STPA Handle 00:01:43
  • 5. STPA Knob 00:03:48
  • 6. STPA Stude 00:02:51
  • 7. STPA Screw 00:05:26
  • 8. STPA Spring 00:01:41
  • 9. STPA Spring Washer 00:01:09
  • 10. STPA Machine Screw 00:02:32
  • 11. STPA Ball 00:00:56
  • 12. Square Tool Post Assembly 00:16:33
  • 1. SECRA Connecting Rod 00:08:24
  • 2. SECRA Bracess 00:05:17
  • 3. SECRA Strap 00:14:02
  • 4. SECRA Jib 00:04:04
  • 5. SECRA Cotter 00:05:30
  • 6. SECRA Set Screw 00:04:29
  • 7. Steam Engine Connecting Rod Assembly 00:08:36
+ View More
Other Courses
06:30:04 Hours
SOLIDWORKS
Updated Wed, 29-Sep-2021
₹8000 ₹3200
03:58:59 Hours
PRIMAVERA
Updated Wed, 29-Sep-2021
₹12000 ₹3600
02:11:46 Hours
QUANTITY SURVEYING
Updated Wed, 29-Sep-2021
₹16000 ₹8000
11:31:42 Hours
CATIA
Updated Wed, 29-Sep-2021
₹8000 ₹3200
23:06:03 Hours
CREO
Updated Wed, 29-Sep-2021
₹8000 ₹3200
02:12:22 Hours
HYPERMESH
Updated Tue, 28-Sep-2021
₹5000 ₹2500
03:13:08 Hours
ANSYS WORKBENCH
Updated Wed, 29-Sep-2021
₹6000 ₹3000
23:38:59 Hours
AUTOCAD(2D&3D)
Updated Mon, 30-May-2022
₹5000 ₹1000
04:02:45 Hours
FOUR REALTIME PROJECTS USING STAAD STRUCTURAL SOFTWARE
Updated Tue, 28-Sep-2021
₹4000 ₹2000
03:52:36 Hours
FOUR REALTIME PROJECTS USING ETABS STRUCTURAL SOFTWARE
Updated Tue, 28-Sep-2021
₹4000 ₹2000
11:40:26 Hours
STAAD PRO LEVEL 1
Updated Wed, 31-Aug-2022
₹5000 ₹2500
07:12:29 Hours
STAAD PRO LEVEL 2
Updated Mon, 27-Jun-2022
₹5000 ₹2500
00:00:00 Hours
SAP & SAFE
Updated Sun, 27-Feb-2022
₹10000 ₹3000
11:39:30 Hours
ETABS STRUCTURAL
Updated Wed, 29-Sep-2021
₹10000 ₹3000
11:39:39 Hours
PRO E
Updated Tue, 28-Sep-2021
Free
16:33:19 Hours
UNIGRAPHICS
Updated Wed, 29-Sep-2021
₹8000 ₹3200
09:58:50 Hours
CATIA PROJECTS
Updated Tue, 28-Sep-2021
₹6000 ₹3000
08:43:47 Hours
UNIGRAPHICS PROJECTS
Updated Mon, 27-Sep-2021
₹1800 ₹900
04:23:46 Hours
3DS MAX 2011
Updated Wed, 29-Sep-2021
₹5000 ₹2000
20:46:36 Hours
PROE PROJECTS
Updated Tue, 28-Sep-2021
₹4800 ₹2400
06:44:22 Hours
3DS MAX 2014
Updated Wed, 29-Sep-2021
₹5000 ₹2500
Preview This Course
₹3000 ₹6000
Pay Now
Includes:
  • 03:58:01 Hours Videos Lessons
  • 261 Lessons
  • 90 Days Access
  • Watch Anyware