What Will I Learn?
Course Syllabus
225 Lessons
23:06:03 Hours
Sketcher Operations v 5.0
14 Lessons
01:42:33 Hours
- 1. Line, Rectangle and Circle Commands 00:09:01
- 2. Arcs and Ellipse 00:08:04
- 3. Spline, Fillet and Chamfer 00:07:02
- 4. Center line, Point, Co Ordinate System and Text 00:06:49
- 5. Offset and Thicken Command 00:07:34
- 6. Palette, Construction Centre line, Center line Tangent, Construction Point and Construction Co ordi 00:05:03
- 7. Dimensional Constraints 00:06:01
- 8. Geometrical Constraints 1 00:06:48
- 9. Geometrical Constraints. 2 00:07:45
- 10. Perimeter, Base line and Reference Dimensions 00:07:55
- 11. Modify ,Mirror and Divide 00:08:50
- 12. Delete Segment,Corner and Rotate Resize 00:08:17
- 13. Inspection Commands 00:07:40
- 14. Relations 00:05:44
Solid & Surface Modeling Operations v 5.0
48 Lessons
05:36:09 Hours
- 15. Extrude 1 00:07:12
- 16. Extrude 2 00:09:06
- 17. Extrude 3 00:07:01
- 18. Revolve 00:09:02
- 19. Sweep 00:08:39
- 20. Blend 1 00:08:46
- 21. Blend 2 00:07:14
- 22. Swept Blend 1 00:08:08
- 23. Swept Blend 2 00:06:50
- 24. Swept Blend 3 00:06:32
- 25. Rotational Blend 1 00:07:47
- 26. Rotational Blend 2 00:06:33
- 27. Datum Axis 1 00:07:04
- 28. Datum Axis 2 00:05:59
- 29. Datum Plane 00:09:14
- 30. Datum PointPoint, Offset Co Ordinate System And Field 00:10:29
- 31. Co Ordinate System Creation 00:04:59
- 32. Hole 1 00:08:29
- 33. Hole 2 00:07:27
- 34. Round 1 00:05:04
- 35. Round 2 00:05:30
- 36. Round 3 00:04:26
- 37. Auto Round 00:04:37
- 38. Edge And Corner Chamfer 00:06:24
- 39. Draft 00:08:39
- 40. Variable Pull Direction Draft 00:04:46
- 41. Shell 00:05:35
- 42. Profile and Trajectory Rib 00:07:40
- 43. Toroidal Bend 00:07:28
- 44. Spinal Bend 00:07:02
- 45. Pattern Dimension 00:08:25
- 46. Pattern Direction 00:06:25
- 47. Pattern Axis 00:04:55
- 48. Pattern Fill 00:04:59
- 49. Pattern Table 00:06:23
- 50. Pattern Reference, Curve and Point 00:06:11
- 51. Geometry Pattern 00:02:48
- 52. Mirror, Trim And Merge 00:09:22
- 53. Extend and Offset 00:09:08
- 54. Intersect and Project 00:07:16
- 55. Thicken and Solidify 00:05:57
- 56. Wrap and Remove 00:07:37
- 57. Split Surface and Wrap 00:06:53
- 58. Boundary Blend, Fill and Vertex Round 00:06:41
- 59. Family Table 00:08:01
- 60. Relations and Parameters 00:07:00
- 61. Apply Material, Mass Properties And Measure 00:06:40
- 62. Appearances And Scenes 00:07:46
Assembly Operations v 5.0
8 Lessons
00:49:03 Hours
- 63. Introduction To Assembly And Bottom Up Approach 00:07:38
- 64. Assembly Constraints 1 00:06:56
- 65. Assembly Constraints 2 00:06:43
- 66. Drag Components And Repeat Commands 00:05:27
- 67. Reference Pattern 00:04:59
- 68. Applying Fasteners 00:05:36
- 69. Creating Sections 00:07:58
- 70. Exploded View and Edit Positions 00:03:46
Drawing & Detailing Operations v 5.0
13 Lessons
01:22:23 Hours
- 71. Introduction To Drawing and Basic Setup 00:06:28
- 72. General View, Projection View and Drawing Models 00:08:48
- 73. Detailed View, Auxiliary View and Revolved View 00:07:32
- 74. Component Display, Edge Display and Arrows 00:05:05
- 75. Table Creation and Its Options 00:05:28
- 76. Bill Of Materials Creation Automatically and Manually 00:07:47
- 77. Hole Table 00:04:21
- 78. Balloon Creation Automatically and Manually, Merge and Detach Balloons 00:06:02
- 79. Show Model Annotation and Dimensions 00:07:49
- 80. Ordinate And Auto Oridinate Dimension, Note, Surface Finish, Symbols From Palettes and Datum Tar 00:08:04
- 81. Attachment, Align, Jog, Break and Clean Up Dimensions 00:05:55
- 82. Text, Line and Arrow Styles 00:04:43
- 83. Geometric Tolerance and Datum Feature Symbol 00:04:21
Sheet Metal Operations v 5.0
13 Lessons
01:12:58 Hours
- 84. Introduction To Sheet Metal, Extrude And Planar Commands 00:04:42
- 85. Flat Command 00:08:42
- 86. Flange 1 00:06:35
- 87. Flange 2 00:07:05
- 88. Bend Command 00:05:33
- 89. Planar Bend 00:04:33
- 90. Unbend, Bend Back And Flat Pattern 00:04:18
- 91. Edge Bend, Edge Rip, Surface Rip, Sketched Rip And Rip Connect 00:07:24
- 92. Forms 1 Punch And Die 00:05:24
- 93. Forms 2 Sketched, Quilt And Flatten 00:05:00
- 94. Conversion And Corner Relief 00:05:43
- 95. Offset, Extend, Split Area And Pattern Commands 00:03:37
- 96. Join And Merge Commands 00:04:22
Sketcher Exercises_Set 1 v 5.0
9 Lessons
00:50:58 Hours
- 1. Lab Fig 1 00:04:26
- 2. Lab Fig 2 00:03:28
- 3. Lab Fig 3 00:03:06
- 4. Lab Fig 4 00:06:15
- 5. Lab Fig 5 00:07:04
- 6. Lab Fig 6 00:05:48
- 7. Lab Fig 7 00:06:55
- 8. Lab Fig 8 00:06:33
- 9. Lab Fig 9 00:07:23
Sketcher Exercises_Set 2 v 2.0
8 Lessons
00:42:47 Hours
- 1 Sketch 1 00:03:08
- 2 Sketch 2 00:05:06
- 2 Sketch 2 00:05:06
- 4 Sketch 4 00:03:50
- 5 Sketch 5 00:06:26
- 6 Sketch 6 00:07:21
- 7 Sketch 7 00:05:07
- 8 Sketch 8 00:06:43
Part Modeling Exercises_Set 1 v 5.0
51 Lessons
05:45:01 Hours
- 10. Lab Fig 10 00:05:48
- 11. Lab Fig 11.1 00:05:49
- 12. Lab Fig 11.2 00:06:21
- 13. Lab Fig 12 00:05:33
- 14. Lab Fig 13 00:05:11
- 15. Lab Fig 14 00:05:48
- 16. Lab Fig 15 00:07:53
- 17 . Lab Fig 16 00:05:22
- 18. Lab Fig 17 00:06:40
- 19. Lab Fig 18 00:09:01
- 20. Lab Fig 19 00:03:41
- 21. Lab Fig 20 00:08:55
- 22. Lab Fig 21. 1 00:08:12
- 23. Lab Fig 21. 2 00:03:47
- 24. Lab Fig 22 00:06:16
- 25. Lab Fig 23 00:04:52
- 26. Lab Fig 24 00:07:25
- 27. Lab Fig 25.1 00:06:44
- 28. Lab Fig 25.2 00:06:52
- 29. Lab Fig 25.3 00:07:50
- 30. Lab Fig 26 00:03:30
- 31. Lab Fig 27 00:05:50
- 32. Lab Fig 28 00:07:34
- 33. Lab Fig 29 00:05:51
- 34. Lab Fig 30 00:07:53
- 35. Lab Fig 31 00:07:17
- 36. Lab Fig 33.1 00:07:13
- 37. Lab Fig 33.2 00:06:40
- 38. Lab Fig 33.3 00:04:27
- 39. Lab Fig 34 00:06:17
- 40. Lab Fig 35 00:08:28
- 41. Lab Fig 36 00:09:19
- 42. Lab Fig 37.1 00:08:02
- 43. Lab Fig 37.2 00:07:31
- 44. Lab Fig 38 00:07:27
- 45. Lab Fig 39 00:08:15
- 46. Lab Fig 40 00:06:07
- 47. Lab Fig 41.1 00:06:44
- 48. Lab Fig 41.2 00:06:53
- 49. Lab Fig 42.1 00:05:29
- 50. Lab Fig 42.2 00:05:52
- 51. Lab Fig 43 00:09:15
- 52. Lab Fig 44.1 00:05:51
- 53. Lab Fig 44.2 00:06:59
- 54. Lab Fig 44.3 00:07:48
- 55. Lab Fig 45.1 00:08:06
- 56. Lab Fig 45.2 00:09:11
- 57. Lab Fig 45.3 00:05:19
- 58. Lab Fig 46 00:09:26
- 59. Lab Fig 47.1 00:08:14
- 60. Lab Fig 47.2 00:04:13
Part Modeling Exercises_Set 2 v 2.0
45 Lessons
03:46:08 Hours
- 9 Part 1 00:01:47
- 10 Part 2 00:01:37
- 11 Part 3 00:01:55
- 12 Part 4 00:02:08
- 13 Part 5 00:01:53
- 14 Part 6 00:02:27
- 15 Part 7 00:03:09
- 16 Part 8 00:02:25
- 17 Part 9 00:03:54
- 18 Part 10 00:04:19
- 19 Part 11 00:03:37
- 20 Part 12 00:03:27
- 21 Part 13 00:03:40
- 22 Part 14 00:04:55
- 23 Part 15 00:06:31
- 24 Part 16 00:08:01
- 25 Part 17 00:07:16
- 26 Part 18 00:05:44
- 27 Part 19 00:06:59
- 28 Part 20 00:07:39
- 29 Part 21 00:04:41
- 30 Part 22 00:06:15
- 31 Part 23 00:06:23
- 32 Part 24 00:07:32
- 33 Part 25 00:08:09
- 34 Part 26 00:05:57
- 35 Part 27 00:05:14
- 36 Part 28 00:05:54
- 37 Part 29 00:07:42
- 38 Part 30 00:06:05
- 39 Part 31 00:02:20
- 40 Part 32 00:06:33
- 41 Part 33 00:04:49
- 42 Part 34 00:09:08
- 43 Part 35 00:07:14
- 44 Part 36 00:06:51
- 45 Part 37 00:07:12
- 46 Part 38 00:02:37
- 47 Part 39 00:04:22
- 48 Part 40 00:03:39
- 49 Part 41 00:06:04
- 50 Part 42 00:03:28
- 51 Part 43 00:04:29
- 52 Part 44 00:03:39
- 53 Part 45 00:06:28
Universal Coupling Assembly v 2.0
6 Lessons
00:25:11 Hours
- 54 Universal Coupling Centre Block 00:02:34
- 55 Universal Coupling Collar 00:02:31
- 56 Universal Coupling Fork 2 Off 00:05:59
- 57 Universal Coupling Pin 00:03:42
- 58 Universal Coupling Taper Pin 00:01:44
- 59 Universal Coupling Assmbly 00:08:41
Knuckle Joint Assembly v 2.0
6 Lessons
00:28:16 Hours
- 60 Knuckle Joint Collar 00:03:07
- 61 Knuckle Joint Eye End 00:05:28
- 62 Knuckle Joint Fork End 00:07:45
- 63 Knuckle Joint Pin 00:04:31
- 64 Knuckle Joint Taper Pin 00:02:15
- 65 Knuckle Joint Assembly 00:05:10
Shaft Support Sub Assembly v 2.0
4 Lessons
00:24:36 Hours
- 66 Shaft Support Sub Part 1 00:05:45
- 67 Shaft Support Sub Part 2 00:06:11
- 68 Shaft Support Sub Part 3 00:03:29
- 69 Shaft Support Sub Part 4 00:09:11
+ View More
Other Courses
00:00:00 Hours
Updated Sat, 23-May-2020
₹4000
₹2000
00:00:00 Hours
Updated Sat, 23-May-2020
₹4000
₹2000
00:00:00 Hours
Updated Sat, 23-May-2020
₹5000
₹5000
00:00:00 Hours
Updated Sat, 23-May-2020
₹4000
₹2000
Write A Public Review